Everest ESRF3 Reach-In Refrigerator Freezer
- Reach-In Dual Temperature Refrigerator/Freezer Combo
- Three-section, 74-3/4″W
- 46.0 (R) & 22.0 (F) cu. ft. capacity
- Self-contained top mounted refrigeration
- (3) solid hinged self-closing field reversible doors (locking)
- (9) epoxy coated wire shelves
- Height adjustable clips, digital controls with LED display
- Auto defrost, LED interior lighting, pressure relief port
- Stainless steel interior, stainless steel sides
- Galvanized steel top, bottom & rear
- R290 Hydrocarbon refrigerant
- Dual 1/4 HP (R) & 1/2 HP (F) compressors
- 115v/60/1-ph, 10.0 amps, cord
- NEMA 5-15P, NSF, cETLus, ETL-Sanitation
Restaurant and More is an Authorized Retailer of Everest products.
Items purchased from Restaurant and More are:
- Brand new and in original packaging.
- Covered by the full manufacturer warranty.
- Qualified for manufacturer service and support.
- Questions? Call 800-431-9726
Description
Refrigeration System
∙ Top mounted, self-contained and fully detachable condensing unit uses environmentally friendly R404A* refrigerant with zero (0) Ozone Depletion Potential (ODP) and EPA compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). R290 condensing units are
replaceable and require no on-site brazing. *Ask about alternative refrigerant.
∙ PSC evaporator fan motors for R404A models. Electronically commutated (ECM) fan motors for R290 models.
∙ Airflow guard ensures optimal circulation of cold air. R290 models include fulllength air duct system.
∙ Time-initiated and temperature-terminated auto defrost heater for R404A and R290 freezers. Air defrost for R290 refrigerators.
∙ Large capacity, corrosion-resistant condenser and evaporator coils.
∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
∙ High performance condenser fan motors ensure efficient compressor ventilation. R290 models use autoreverse condenser fan motors which also support condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
∙ Pressure relief devices allow smooth access to cabinet interior when re-opening doors.
∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
Cabinet Construction
∙ Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace.
∙ Insulated interior wall between refrigerator and freezer compartments.
∙ Galvanized steel top, bottom and rear.
∙ 2.5″ thick high density polyurethane insulation.
∙ Four 5″ swivel casters with locks on front set.
Lighting
∙ Energy efficient silicone coated and shatter-proof LED lighting provides bright, high color illumination with
low heat output.
Doors
∙ Heavy duty stainless steel interior / exterior.
∙ 2.5″ thick high density polyurethane insulation.
∙ Frame heaters prevent exterior moisture build up.
∙ Self-closing with adjustable torsion system for a positive seal.
∙ Snap-in magnetic door gasket make cleaning and replacement an easy process.
∙ High strength, recessed door handles.
∙ Pre-installed door locks keep your items safe from theft.
∙ Field reversible.
Shelving
∙ Epoxy coated, steel wire shelves (see table for quantity).
∙ Height adjustable stainless steel clips. Temperature Control
∙ Multi-function digital controller with easy to read LED display.
∙ Factory preset temperature, 35°F for refrigerators and -4°F for freezers. Temperature setting range from 33° F to 54°F for refrigerators and -10°F to 54°F for freezers.
∙ R290 models include audible overheat protection alarm for compressor and condenser coil.
Manufacturer | Everest |
Manufacturer Sku | ESRF3 |
Weight | 654 |
Width | 74.75″ |
Height | 79.25 |
Depth | 31.63 |
Size | 3 section |
Doors | hinged solid |
Refrigeration | self-contained refrigeration |
Exterior Finish | stainless steel front & sides |
Compressor HP | dual temp 1/4 & 1/2 HP |
Interior Finish | stainless steel |
Depth (front – back) | standard |
Interior configuration | shelves |
Thermometer | exterior digital |
Compressor Location | top mounted compressor |
Documents:
FAQ's
If you do not have an elevated loading dock or forklift to unload your items from the truck, you will need a lift gate and must select this option at checkout. Additional fees will apply for lift gate service. A lift gate is a motorized platform attached to the back of the truck that will physically lower your order to the ground so that you can take it inside your business or home. The truck driver will place your order on the ground using the lift gate and you are responsible for bringing it inside.
Reviews
There are no reviews yet.